APLR0610 - Red Lion Controls APLR0610 Indicator - 6-Digit Rate, Time Base...
- Part Number:
- APLR0610
- Model Number:
- APLR0610
- Make:
- RED LION CONTROLS
- Lead Time:
- Available
- Qty In Stock:
- Available
Red Lion Controls APLR0610 Indicator - 6-Digit Rate, Time Base Simple Type: PLC Counter I/O Module
The Apollo Time Base Rate Indicators (Model APLR) and Module (Model PBLR), provide the versatility and flexibility needed to accommodate virtually any rate measuring need. Based on Micro-processor technology, this unit represents the optimum in cost/performance ratio. This unit has the ability to scale for direct readout in terms of the units being measured. Whether a machine produces bottles, cloth, wire, or beverage mix, operation is enhanced when the rate readout is expressed directly in bottles/min., feet/min., gallons/hour, or whatever units are needed in plant operations. The APLR/PBLR can provide this capability through its settable time base, programmable decimal points, and frequency doubling functions. The APLR/PBLR can also accommodate magnetic pickups, as well as logic (sourcing output) sensors and NPN open collector (sinking output) sensors. This unit also has a self-test feature, which checks all the micro-processor and display driver circuitry after power-up (if enabled). This self-test also can be used to test the time base select DIP switches and decimal point select DIP switches, to make certain all switches are functioning properly. Power and input connections are made via a removable terminal block, located at the rear of the unit. Each terminal can accept one #14 AWG wire. DIP switches at the side of the unit are used to program the input configuration. The Apollo Rate Indicator has a sealed metal die-cast bezel which meets NEMA 4/IP65 specifications for wash-down and/or dust, when properly installed. Two mounting clips are provided for easy installation. The Time Base Rate Indicator uses a 6-digit, 0.56" (14.2 mm) high LED display, which is readable to 23 feet (7 M).
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 0.02% ACCURACY
- 6-DIGIT, 0.56" (14.2 mm) HIGH LED DISPLAY (APLR)
- A WIDE VARIETY OF SENSORS
- CRYSTAL-CONTROLLED TIME-BASE PROGRAMMABLE UP TO 32.764 SECONDS PROVIDES DIRECT-READING FOR ANY RATE UNITS
- FREQUENCY DOUBLING
- LEADING ZERO BLANKING
- NEMA 4/IP65 SEALED FRONT METAL BEZEL
- POWER-UP SELF-TEST
- PROGRAMMABLE DECIMAL POINTS
- PROGRAMMABLE INPUT CIRCUIT, ACCEPTS OUTPUTS FROM
Specifications
- 10,000 cps with min. pulse width “ON” and “OFF” times of 50 µsec.
- DC Operation: 24 VDC, 10% @ 0.6 A max.
- ACCURACY: 0.02%
- DISPLAY: 6-Digit, 0.56" (14.2 mm) high LED display. (APLR)
- MAXIMUM OPERATING FREQUENCY: 10 KHz, 50% duty cycle.
- PBLR: AC Operation: Switch selected via the LDD power supply board, 115/230 (+/-10%), 50/60 Hz, 10 VA for 4-digit, 15 VA for 6 digit (including LDD).
- POWER REQUIREMENTS: APLR: AC Operation: Available in two voltages, 115 VAC, ±10%, 50/60 Hz, 14 VA or 230 VAC, ±10%, 50/60 Hz, 14 VA
- SENSOR POWER: +12 VDC, ±25% @ 100 mA max.
- TIME BASE SELECTION RANGE: 0.004 to 32.764 seconds.
Applications
- None Available
Aliases
- None Available
